One Touch Diamond and Moissanite Tester Diamond Detector Moissanite Testers Jewel Tool Description
Methods of operation: 1. Install the battery, remove the probe sheath, turn on the power supply, the power indicator lights, the instrument into the preheating state, about 45 seconds after the reserve indicator lights, the instrument is ready to be detected at any time. 2. If a gem is not inlaid, the gem can be placed on a copper tray and touched by hand with a copper tray or can be clamped with tweezers on a copper tray; if the gem is inlaid, it is not necessary to use a copper tray, but the metal part of the gem can be handled. 3. Hand-held instrument and finger contact conductive plate, so that the probe and the gem under test as far as possible vertical and lift, do not need too much force or the probe may be damaged. 4. when the jewel is diamonds, the ‘DIAMOD’ green indicator light is lit and accompanied by a continuous beep. 5. when the detected gemstone is morsang, the ‘MOISSANITE’ blue indicator lights on. 6. when the gem is selected for imitation, the instrument does not reflect or the middle red light is lit. 7. when exposed to metal, orange indicator lights are lit and accompanied by high frequency beep. 8. when the battery power is low, the low voltage indicator lights up, prompting the user to replace the new battery. Please contact me if you have any problems in using. Welcome to buy, thank you.